Description & Use:
STRAUSS & CO.'s unique Multi File System kit
is widely used in the plastic molds and
aluminium extruders industries. The unique
design of the holding system allows "STRAUSS
& CO." to manufacture these very wide, but
still very thin flat files. The special design
enables full contact between the whole surface
of the file and the work piece. All the MS files
are available individually (replacements) or as
part of a kit.
Grit Size:
The files are available in the following 4 grit sizes: D30 (#600), D54 (#325/400), D91 (#170/200),
D126 (#120/140). Also available with coating on one side only.
Thickness of files:
| MS15-D30 = 0.4mm. |
MS25-D30 = 0.4mm. |
| MS15-D54 = 0.5mm. |
MS25-D54 = 0.5mm. |
| MS15-D91 = 1.0mm. |
MS25-D91 = 1.0mm. |
| MS15-D126 = 1.2mm. |
MS25-D126 = 1.2mm. |
Files are available in the following kits, (each kit includes a wrench and is
packed in a specially designed case):
 |
Cat. No. MSSET1: One of each of the following: MSHANDLE, MS15-D30, MS15-D54,
MS25-D30 AND MS25-D54. |
|
Cat. No. MSSET2: One of each of the following: MSHANDLE, MS15-D91, MS15-D126,
MS25-D91 AND MS25-D126. |
|
Cat. No. MSSET3: One of each of the following: MSHANDLE, MS25-D30, MS25-D54,
MS25-D91 AND MS25-D126. |
|
Cat. No. MSSET-SVC: One of each of the following: MSHANDLE, MS15X1-D54,
MS15X1-D91, AND MS15X1-D126. |
Tolerance: Thickness ±0.15mm. Profile ±0.3mm.
