Description & Use:
STRAUSS & CO’s Countersink is ideal for deburring and chamfering holes in materials such as glass, tungsten carbide, Hss, fiberglass and epoxy, re-inforced plastic and other hard metals (45hrc and harder).The COU25 plated with D252 is specially made and widely used for holes on ceramic surfaces.
Range:3.2mm. - 25.4mm.
 |
NB4001ST, COU6D126, COU10D126, COU10D252, COU3.2D126. |
| STRAUSS & CO’s fixed diamond coated countersink 10.4mm is ideal for deburring and chamfering holes in materials such
as glass, tungsten carbide, hss and other hard metals.
Can also be used for deburring and chamfering material such
as re-inforced plastic, fiberglass and epoxy (D252).
Standard grit sizes: D126 (#120/140), D252 (#60/80). Other grit sizes are available upon request. |
|
| STRAUSS & CO’s fixed diamond coated countersink 6.3mm is ideal for deburring and chamfering holes in materials such
as glass, tungsten carbide, hss and other hard metals.
Standard grit size: D126 (#120/140). Other grit sizes are available upon request. |
|
| STRAUSS & CO’s fixed diamond coated countersink 3.2mm is ideal for horizontal filing jobs. Coated length 15.0mm.
Standard grit size: D126 (#120/140). Other grit sizes are available upon request. |
|
| STRAUSS & CO’s fixed diamond coated countersink 25.0mm is ideal for deburring and chamfering holes in materials such
as glass, re-inforced plastic, fiberglass and epoxy.
Standard grit size: D252 (#60/80). Other grit sizes are available upon request. |
|
| STRAUSS & CO’s EX. diamond coated roto-drive 25mm is for external chamfering on re-inforced plastic, fiberglass and
epoxy.
Standard grit size: D252 (#60/80). Other grit sizes are available upon request. |
